Yum的图形化前端主要有yumex和kyum。它们并不是独立于Yum的，而是Yum的图形前端，也就是说在安装和使用Yumex和kyum同时，都是以Yum的安装和配置为基础；所以在用Yumex或kyum 时，必须先安装配置Yum。

把光盘里的所有文件都拷贝到/var/ftp/pub/下面.实际上只拷贝Server 和VT两个文件过去就行了,还可以不用把全部RPM安装软件包拷贝过去,太多了,一共2.4G左右,如果系统一开始安装分配给var的空间不够就可以这样做.

完成后切换到/var/ftp/pub/目录下

删除*.html

进去后添加如下内容.注意看清了内容很类似.

配置文件内容简介：
[ ]内的是仓库的名字
name仓库的描述
baseurl 是你的YUM源地址,因为这里配置的是FTP,还可以是HTTP,FILE等
enabled 是否启用这个仓库，1为起用，0为禁用
gpgcheck 是否检查GPG签名（用来验证要安装的包是不是REDHAT官方的）
GPGKEY 的存放地址需要用下面的命令到入这个签名。才能使用这项功能

 

三.配置服务器
安装createrepo工具，然后用这个工具生成YUM通用数据库.

可看到一个是安装,两个操作,很类似的.也可以看到是成功的.

这样就OK下

四.下面看下yum的命令和进行测试.
   1. yum install <package> 这里是安装下载的软件包,由于本实验没有提供FTP下载.

   2.yum localinstall <package> 本地安装软件包,在这里本服务器做YUM源.看个例子.

   

[root@rhel5 /]# yum localinstall /var/ftp/pub/Server/dhcp*
Loading "rhnplugin" plugin
Loading "installonlyn" plugin
This system is not registered with RHN.
RHN support will be disabled.
Setting up Local Package Process
Examining /var/ftp/pub/Server/dhcp-3.0.5-3.el5.i386.rpm: dhcp - 12:3.0.5-3.el5.i386
Examining /var/ftp/pub/Server/dhcp-devel-3.0.5-3.el5.i386.rpm: dhcp-devel - 12:3.0.5-3.el5.i386
Examining /var/ftp/pub/Server/dhcpv6-0.10-33.el5.i386.rpm: dhcpv6 - 0.10-33.el5.i386
Examining /var/ftp/pub/Server/dhcpv6_client-0.10-33.el5.i386.rpm: dhcpv6_client - 0.10-33.el5.i386
Marking /var/ftp/pub/Server/dhcp-3.0.5-3.el5.i386.rpm to be installed
Setting up repositories
Reading repository metadata in from local files
Marking /var/ftp/pub/Server/dhcp-devel-3.0.5-3.el5.i386.rpm to be installed
Setting up repositories
Reading repository metadata in from local files
Marking /var/ftp/pub/Server/dhcpv6-0.10-33.el5.i386.rpm to be installed
Setting up repositories
Reading repository metadata in from local files
Marking /var/ftp/pub/Server/dhcpv6_client-0.10-33.el5.i386.rpm to be installed
Setting up repositories
Reading repository metadata in from local files
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Package dhcp.i386 12:3.0.5-3.el5 set to be updated
---> Package dhcpv6.i386 0:0.10-33.el5 set to be updated
---> Package dhcpv6_client.i386 0:0.10-33.el5 set to be updated
---> Package dhcp-devel.i386 12:3.0.5-3.el5 set to be updated
--> Running transaction check

Dependencies Resolved

=============================================================================
 Package                 Arch       Version          Repository        Size
=============================================================================
Installing:
 dhcp                    i386       12:3.0.5-3.el5   /var/ftp/pub/Server/dhcp-3.0.5-3.el5.i386.rpm  2.1 M
 dhcp-devel              i386       12:3.0.5-3.el5   /var/ftp/pub/Server/dhcp-devel-3.0.5-3.el5.i386.rpm  1.4 M
 dhcpv6                  i386       0.10-33.el5      /var/ftp/pub/Server/dhcpv6-0.10-33.el5.i386.rpm  759 k
 dhcpv6_client           i386       0.10-33.el5      /var/ftp/pub/Server/dhcpv6_client-0.10-33.el5.i386.rpm  161 k

Transaction Summary
=============================================================================
Install      4 Package(s)        
Update       0 Package(s)        
Remove       0 Package(s)        

Total download size: 4.4 M
Is this ok [y/N]: y
Downloading Packages:
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing: dhcp                         ######################### [1/4]
  Installing: dhcpv6                       ######################### [2/4]
  Installing: dhcpv6_client                ######################### [3/4]
  Installing: dhcp-devel                   ######################### [4/4]

Installed: dhcp.i386 12:3.0.5-3.el5 dhcp-devel.i386 12:3.0.5-3.el5 dhcpv6.i386 0:0.10-33.el5 dhcpv6_client.i386 0:0.10-33.el5
Complete!
[root@rhel5 /]#

 

[root@rhel5 /]# yum update
Loading "rhnplugin" plugin
Loading "installonlyn" plugin
This system is not registered with RHN.
RHN support will be disabled.
Setting up Update Process
Setting up repositories
Reading repository metadata in from local files
No Packages marked for Update/Obsoletion

[root@rhel5 /]# yum check-update
Loading "rhnplugin" plugin
Loading "installonlyn" plugin
This system is not registered with RHN.
RHN support will be disabled.
Setting up repositories
Reading repository metadata in from local filesck-update

[root@rhel5 /]# yum search "dhcp*"
Loading "rhnplugin" plugin
Loading "installonlyn" plugin
This system is not registered with RHN.
RHN support will be disabled.
Setting up repositories
Reading repository metadata in from local files

 

dhcpv6_client.i386                       0.10-33.el5            installed      
Matched from:
dhcpv6_client
DHCPv6 client

Provides the client for the DHCPv6 protocol (RFC 3315) to support
dynamic configuration of IPv6 addresses and parameters.
See man dhcp6c(8), dhcp6c.conf(5), and the documentation in
/usr/share/dhcpv6_client* .

 

dhcp-devel.i386                          12:3.0.5-3.el5         installed      
Matched from:
dhcp-devel
Development headers and libraries for interfacing to the DHCP server

Libraries for interfacing with the ISC DHCP server.

 

dhcp.i386                                12:3.0.5-3.el5         installed      
Matched from:
dhcp
A DHCP (Dynamic Host Configuration Protocol) server and relay agent.

DHCP (Dynamic Host Configuration Protocol) is a protocol which allows
individual devices on an IP network to get their own network
configuration information (IP address, subnetmask, broadcast address,
etc.) from a DHCP server. The overall purpose of DHCP is to make it
easier to administer a large network.  The dhcp package includes the
ISC DHCP service and relay agent.

To use DHCP on your network, install a DHCP service (or relay agent),
and on clients run a DHCP client daemon.  The dhcp package provides
the ISC DHCP service and relay agent.

 

dhcpv6.i386                              0.10-33.el5            installed      
Matched from:
dhcpv6
DHCPv6 - DHCP server and client for IPv6

Implements the Dynamic Host Configuration Protocol (DHCP) for
Internet Protocol version 6 (IPv6) networks in accordance with
RFC 3315 : Dynamic Host Configuration Protocol for IPv6 (DHCPv6).
Consists of dhcp6s(8), the server DHCP daemon, and dhcp6r(8),
the DHCPv6 relay agent.
Install this if you want to support dynamic configuration of
IPv6 addresses and parameters on your IPv6 network.
See man dhcp6s(8), dhcp6r(8), dhcp6s.conf(5),
and the documentation in /usr/share/doc/dhcpv6* .

[url]http://dhcpv6.sourceforge.net/[/url]
[root@rhel5 /]#

10.yum remove | erase package1 删除程序包
 [root@rhel5 /]# yum remove "dhcp*"
Loading "rhnplugin" plugin
Loading "installonlyn" plugin
This system is not registered with RHN.
RHN support will be disabled.
Setting up Remove Process
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Package dhcp.i386 12:3.0.5-3.el5 set to be erased
---> Package dhcpv6.i386 0:0.10-33.el5 set to be erased
---> Package dhcpv6_client.i386 0:0.10-33.el5 set to be erased
---> Package dhcp-devel.i386 12:3.0.5-3.el5 set to be erased
--> Running transaction check

Dependencies Resolved

=============================================================================
 Package                 Arch       Version          Repository        Size
=============================================================================
Removing:
 dhcp                    i386       12:3.0.5-3.el5   installed         2.1 M
 dhcp-devel              i386       12:3.0.5-3.el5   installed         1.4 M
 dhcpv6                  i386       0.10-33.el5      installed         759 k
 dhcpv6_client           i386       0.10-33.el5      installed         161 k

Transaction Summary
=============================================================================
Install      0 Package(s)        
Update       0 Package(s)        
Remove       4 Package(s)        

Is this ok [y/N]: y
Downloading Packages:
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
  Removing  : dhcp                         ######################### [1/4]
  Removing  : dhcpv6                       ######################### [2/4]
  Removing  : dhcpv6_client                ######################### [3/4]
  Removing  : dhcp-devel                   ######################### [4/4]

Removed: dhcp.i386 12:3.0.5-3.el5 dhcp-devel.i386 12:3.0.5-3.el5 dhcpv6.i386 0:0.10-33.el5 dhcpv6_client.i386 0:0.10-33.el5
Complete!
[root@rhel5 /]#

yum 会把下载的软件包和header存储在cache中，而不会自动删除。如果觉得它们占用了磁盘空间，可以使用yum clean指令进行清除.
yum clean headers清除header
yum clean packages清除下载的rpm包
yum clean all 清除header与rpm包
 基本完成,呵呵.