RedBoot Command Summary
Note: To execute a command, only the unique prefix of the command needs to be entered. For instance, the letter v can be entered to execute the version command, since it is the only command which begins with a v. In contrast, the letters ad are needed to execute the advanced command, since there are two other commands that begin with a, agent and async.
When a command requires the option enable or disable, only a unique prefix is required, for instance, e or d.
RedBoot Support Commands
Note:
The commands listed below should be used only on the instruction of Advanced Relay Technical Support. Improper use of these commands may render the PXS inoperable.
RedBoot FIS Commands
Note:
The commands listed below should be used only on the instruction of Advanced Relay Technical Support. Improper use of these commands may render the PXS inoperable.
| Command |
Description |
| fis create [-b <base>] [-l <image length>][-s <data length>] [-f <flash address>][-e <entry>] [-r <ram address>][-n] <name> |
Creates an image in FLASH from data in RAM |
| fis delete <name> |
Removes an image from FLASH |
| fis erase -f <flash address> -l <length> |
Erases an area of FLASH |
| fis free |
Shows which areas of FLASH are not in use |
| fis help |
Displays help for FIS commands |
| fis init [-f] |
Initializes FLASH |
| fis list [-c] |
List images in FLASH and information about them
The -c option displays image checksum instead of memory address |
| fis load [-b <base>] [-c] <name> |
Loads an image from FLASH to RAM
The -c option displays the image checksum |
posted on 2006-12-03 21:16
Flutist 阅读(486)
评论(0) 编辑 收藏 引用 所属分类:
资料查询库