cisco学习笔记

      CCIE之路中。。。。其实我是一个天才,可惜天妒英才!o(∩_∩)o...哈哈

  IT博客 :: 首页 :: 新随笔 :: 联系 :: 聚合  :: 管理 ::
  39 随笔 :: 5 文章 :: 36 评论 :: 0 Trackbacks

EIGRP标准配置实验:

拓扑图:

 

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#host R1

R1(config)#no ip do lo

R1(config)#line cons 0

R1(config-line)#no exec-t

R1(config-line)#logg sync

R1(config-line)#end

R1#conf t

R1(config)#int s1/1

R1(config-if)#ip add 10.1.1.1 255.255.255.0

R1(config-if)#no sh

R1(config-if)#int lo 0

R1(config-if)#ip add 1.1.1.1 255.255.255.0

R1(config-if)#no sh

R1(config-if)#int lo 1

R1(config-if)#ip add 3.3.3.3 255.255.255.0

R1(config-if)#no sh

R1(config-if)#exi

R1(config)#router ei

R1(config)#router eigrp 100

R1(config-router)#no auto-summary

R1(config-router)#net 1.1.1.0 0.0.0.255

R1(config-router)#net 3.3.3.0 0.0.0.255

R1(config-router)#net 10.1.1.0 0.0.0.255

R1(config-router)#

*Sep 11 05:52:42.099: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 10.1.1.2 (Serial1/1) is up: new adjacency

 

Router>en

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#host R2

R2(config)#no ip do lo

 

R2(config-line)#no exec-t

R2(config-line)#logg sync

R2(config-line)#end

R2(config)#int s1/0

R2(config-if)#ip add 10.1.1.2 255.255.255.0

R2(config-if)#no sh

R2(config-if)#int lo 0

R2(config-if)#ip add 2.2.2.2 255.255.255.0

 

R2(config-if)#no sh

R2(config)#router eigrp 100

R2(config-router)#no au

R2(config-router)#no auto-summary

R2(config-router)#net 3.3.3.0 0.0.0.255

R2(config-router)#net 10.1.1.0 0.0.0.255

R2(config-router)#

*Sep 11 05:52:38.515: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor 10.1.1.1 (Serial1/0) is up: new adjacency

R2(config-router)#no net 3.3.3.0 0.0.0.255

R2(config-router)#net 2.2.2.0 0.0.0.255

R2(config-router)#^Z

查看邻居表:

R2#sh ip eigrp neighbors

IP-EIGRP neighbors for process 100

H   Address                 Interface       Hold Uptime   SRTT   RTO  Q  Seq

                                            (sec)         (ms)       Cnt Num

0   10.1.1.1                Se1/0             14 00:09:50   16   200  0  2

 

查看路由表:

R2#sh ip route

Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP

       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

       E1 - OSPF external type 1, E2 - OSPF external type 2

       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

       ia - IS-IS inter area, * - candidate default, U - per-user static route

       o - ODR, P - periodic downloaded static route

 

Gateway of last resort is not set

 

     1.0.0.0/24 is subnetted, 1 subnets

D       1.1.1.0 [90/2297856] via 10.1.1.1, 01:10:53, Serial1/0

     2.0.0.0/24 is subnetted, 1 subnets

C       2.2.2.0 is directly connected, Loopback0

     3.0.0.0/24 is subnetted, 1 subnets

D       3.3.3.0 [90/2297856] via 10.1.1.1, 01:10:53, Serial1/0

     10.0.0.0/24 is subnetted, 1 subnets

C       10.1.1.0 is directly connected, Serial1/0

posted on 2008-09-11 07:07 cisco交流平台 阅读(656) 评论(0)  编辑 收藏 引用 所属分类: EIGRP
只有注册用户登录后才能发表评论。